The xCAT® ENT is a revolutionary compact CT scanner designed for intraoperative scanning of the sinuses, skull base and temporal bones. The portability of this device is ideal for use before, during and post-surgery to compare and confirm surgical plans and procedures and is IGS compatible with immediate image transfer
| System Dimensions |
32" x 47" x 60" |
| Weight |
520 lbs |
| Gantry Opening Dimensions |
16” x 21.5” x 17” |
| Gantry Rotation |
360 Degrees |
| Display Monitor Specifications |
| Dimensions |
19" |
| Pixel Array |
1280 x 1024 |
| Gray Scale Levels |
256 |
| Head Holder Specifications |
| Material |
Carbon Fiber |
| Foam Pad Specifications |
| Material |
Foam |
| Image Properties |
| Slice Thickness |
0.4 mm minimum |
| Reconstruction time |
60 sec/300 slices |
| Field of View, axial |
~14 cm |
| Field of View, cross-sectional |
~24 cm |
| Views |
MPR/Axial/Coronal/Sagittal/Oblique/3-D |
| Gray scale display |
-1000 to 3074 HU |
| Display window |
Adjustable level and width |
| Compatibility |
DICOM 3.0 |
Acquisition Protocols |
|
Tube Voltage |
Tube Current |
Pulse Length |
Number of Frames |
Exposure |
Scan Time |
Default Reconstruction Protocol |
Sinus CT |
120 kVp |
6 mA |
16 ms |
600 |
57.6 mAs |
20 s |
SHARP (640x640 0.4, 0.4, f0) |
| Reconstruction Protocols |
|
Coronal Slices |
Sagittal Slices |
Voxel Width/Depth |
Voxel Height |
Filter Type |
SHARP (640x640 0.4, 0.4, f0) |
640 |
640 |
0.4 |
0.4 |
0 |
CALIBRATION (380x380 0.4, 0.1, f0)* |
380 |
380 |
0.4 |
0.1 |
0 |
* CALIBRATION (380x380 0.4, 0.1, f0) protocol should be used for performing quality control testing only.
| Electrical Power Requirements |
| |
Europe |
USA |
| Line Voltage |
~220-240 V |
~115 V |
| Line Frequency |
50-60 Hz |
50-60 Hz |
| Line Current |
2.5 A Standby |
5 A Standby |
| Main Circuit Breaker |
6 A Max. |
12 A Max |
* Voltage must be held to within +- 10% of specified Line Voltage.
Environmental Conditions |
It is recommended that xCAT® ENT is operated in a climate-controlled clinical or hospital environment. Changes in temperature may cause the system to require additional calibration. |
Operating Requirements |
50 to 95 degrees Fahrenheit
(10 to 40 degrees Celsius)
45% to 75% humidity |
Storage Requirements |
32 to 104 degrees Fahrenheit
(0 to 40 degrees Celsius)
30% to 80% humidity |
Heat Dissipation |
Approx. 500W / 1700 BTU/hr |
Caution: Allow systems temperature to adapt to room temperature before powering up the xCAT® ENT scanner hardware or workstation/server.
Installation/Relocation |
The xCAT® ENT cannot be installed or relocated by the user. Proper and safe setup requires specialized training and must be performed by a Xoran Customer Service Engineer. Call Xoran Customer Service 1-800-70-XORAN (800-709-6726) for assistance. |
Apparent Resistance of the Supply Mains
For the purpose of obtaining the apparent resistance of supply mains on the xCAT® ENT CT system, resistance is determined according to the following formula:
R= U0 - U1 / I1
Where:
U0 is the no-load MAINS VOLTAGE.
U1 is the MAINS VOLTAGE under load.
I1 is the mains current under load.
xCAT® ENT CT system utilizes single-phase power so measurements were performed between phase and neutral.
Apparent Resistance of Supply Mains of xCAT® ENT is: 0.171ohms including 15’ long 16AWG medical grade power cord.
Maximum Apparent Resistance should not exceed 1.54 ohms (including supply means) for proper function of xCAT® ENT.
IGS Compatibility
xCAT® ENT is compatible with the following image guided systems. |
GE
IT3500+, ENTrak + ConneCTstat+ |
Medtronic/LandmarX/Xomed
LandmarX Evolution, LandmarX Evolution Plus, LandmarX Element
Medtronic Treon Plus ( w/ ENT software), Tria Plus (w/ ENT software) |
BrainLAB (Requires Pac Xfer Version 5.2 or Higher)
VectorVision
VectorVision2
VectorVision Compact (for ENT)
Kolibri |
Stryker
Stryker Navigation System (original)
Navll
mNAV |
| 
